Ensure that the surface you are applying your static cling window sticker to is perfectly clean.
Using a household spray dispenser, generously spray the glass with a mixture of water and a few drops of washing-up liquid.
Peel your sticker from its backing paper and apply the unprinted,shiny side (the side that was in contact with the backing paper) onto the glass.
Slide the sticker around until it is in the correct position.
Squeegee out the excess water and air bubbles while holding the sticker in place and leaving it to dry.
The window stickers can be cleaned using a weak solution of washing-up liquid and warm water. Do not use harsh cleaning products and avoid rubbing the printed areas.
Retain the backing paper for storing the stickers on when not in use.
Storage: For our full-colour, double-sided prints you should place the unprinted (shiny) side back in contact with the original backing paper. We then recommend placing a sheet of baking parchment (greaseproof paper) between each print, which will help prevent any print from sticking to itself whilst in storage. Ideally, you should store them flat without too much weight on them but can be loosely rolled (providing the baking parchment covers all the printed area)